Adjusting Toe-In - 4X2 Axle—DANA

1. 
   CQ207380-UN-08FEB07

   Using wrench, keep steering rod firm at point (A) and loosen nut (B).

---

2. Remove cotter pin and castle nut (D).
3. Remove joint terminal (C).
4. Turn joint terminal (C) to one side or the other. After adjustment, reinstall terminal and tighten castle nut to specified torque:

   Castle Nut (D)	Torque	150 N·m (111 lb.-ft.)

5. Reinstall cotter pin.