Adjusting Tread of 4x2 Front Wheels—CARRARO

Position jack under front weights.

Never place jack under engine crankcase.

  1. LV8956
    LV8956-UN-17OCT03

    Raise front end of tractor with a jack.
  2. When performing big tread adjustments, loosen bolts (E) and adjust steering rod length (A).
  3. Remove two nuts (B), washers (D) and bolts (C) from front axle (2 on each side).
  4. Slide axle linkage to requested position. Both sides should be adjusted to the same spacing.
  5. Reinstall bolts (B), (C) and (D) to each side of axle. Tighten bolts to specification:
    Bolts (C)Torque400 N·m (295 lb.-ft.)

  6. Adjust toe-in. To do so, consult (Adjusting 4x2 Front Axle Toe-In—CARRARO).

OU31386,0000115-19-20140624