Adjusting Toe-In - 4X2 Axle—CARRARO

1. 
   LV8957-UN-17OCT03

   
   LV8958-UN-17OCT03

   Loosen lock nut (C) on both sides of steering rod (A).

---

2. Adjust left-hand and right-hand side evenly turning inner rod (B) to one side or the other to obtain a greater or smaller length, as necessary, to obtain a toe-in of 3 — 6 mm (1/8 — 1/4 in.).

   Steering rod turn	Approximate adjustment of toe-in
   1/2 turn	8 mm (5/16 in.)
   1 turn	16 mm (5/8 in.)

3. Tighten lock nuts to specification:

   Lock Nut (C)	Torque	120 N·m (88 lb.-ft.)