Using Creeper Transmission (If Equipped)

Do not use creeper transmission with implements that penetrate into soil and so require increased power.

CQ294853
CQ294853-UN-22NOV13

Tractors with Open Operator's Platform

CQ294854
CQ294854-UN-22NOV13

Cab Tractors

CQ294892
CQ294892-UN-26NOV13

With creeper transmission engaged, it is possible to use the following gears: 1st, 2nd, 3rd and reverse.ªªª

To engage creeper transmission:

  1. Stop the tractor completely.

  2. Engage clutch pedal.

  3. Select the desired gear.

  4. Move lever (A) to position (B).

  5. Slowly release the clutch pedal.

To disengage creeper transmission:

  1. Stop the tractor completely.

  2. Engage clutch pedal.

  3. Move lever (A) to one of ranges: A, B, or C.

  4. Slowly release the clutch pedal.

Do not engage creeper transmission when engine speed exceeds 1000 rpm.

Creeper transmission was developed to work under low speed and torque conditions. It is not recommended to pull heavy loads; high load conditions may damage creeper transmission due to overload. Creeper transmission was projected for conditions that require power of up to 35 hp.

OU90500,0000180-19-20140530