Converting Category II Hitch into Category I

CQ294923
CQ294923-UN-28NOV13

Fixed Hitch Arms

Center link arm and ends of hitch arm are dimensioned for hitch pins of Category II implements.

If Category I implements are to be use, Category II hitch can be converted as follows:

  1. Insert bushing (B) to reduce center link arm end diameter. A pin (A) with smaller diameter also is necessary when bushing is installed.

  2. Replace spheres (C) at hitch arm ends.

For further information, see your John Deere dealer.

OU90500,000018D-19-20131128