Changing Transmission-Hydraulic Oil Filters

Change transmission/hydraulic system oil filter after reaching the first 100 working hours. Thereafter, it should be changed every 750 hours of operation.

1. 
   CQ294970-UN-04DEC13

   Remove filter (A) by turning it counterclockwise.

---




2. Apply fine film of oil to new filter rubber ring before installing it.

3. Install new filter; to do so, turn it clockwise, then tighten by hand for another 1/2 turn.

   After replacing the filter, start the engine and let it run for five minutes. Shut off engine and check transmission/hydraulic system oil Level.

4. If necessary, add oil recommended in Section (Fuel, Lubricants and Coolant) in quantity recommended in Section (Specifications—Capacities).