Replacing Front and Rear Work Light Bulbs

Tractors with Open Operator's Station

1. 
   CQ298646-UN-11DEC13

   
   CQ298647-UN-11DEC13

   Remove two cap screws (A).

---




2. Remove lens (B).

3. Remove bulb attaching screw (C).

4. Disconnect power supply cable (D).

5. Remove bulb (E).

   Bulb (E) is of halogen type. It is pressurized and may burst.
   Protect bulb against abrasion and scratches. Wear safety goggles and protective clothing when replacing lamps.

   Wait until a bulb cools down before removing it.

6. Install new bulb, connect power supply cable, bulb attaching screw, lens and two screws in reverse order of disassembly.

Cab Tractors

1. 
   CQ298648-UN-11DEC13

   
   CQ298649-UN-11DEC13

   Remove guard (A) and four attaching screws located underneath.

---




2. Remove lens (B).

3. Release attaching lock (C).

4. Remove bulb (D).

   Bulb (D) is of halogen type. It is pressurized and may burst.
   Protect bulb against abrasion and scratches. Wear safety goggles and protective clothing when replacing lamps.

   Wait until a bulb cools down before removing it.

5. Install new bulb, attaching lock, lens, attaching screws and guard in reverse order of disassembly.