Adjusting Steering Angle

Ask your dealer to carry out the steering angle adjustment according to the tread used and the tire set of your tractor.

BM011203-UN-28SEP16

A - Adjustment Length of Screw

B - Set Screw

This adjustment should be carried out to prevent interference between the front tires and the tractor shields.

Carry out this adjustment each time the tire set is changed.

Length (A) of screw (B) should be adjusted according to specification:

Length of Screw—Dana Axle	Length	54—56 mm (2.1—2.2 in.)
Minimum Length of Screw—ZF Axle	Length	15 mm (0.59 in)

Tighten adjusting screw lock nut (B) to specification:

Lock Nut—DANA Axle	Torque	90 N·m (66 lb·ft)
Lock Nut—ZF Axle	Torque	125 N·m (92 lb·ft)