Adjusting Clutch Pedal Play

1. Loosen lock nut (A) and remove pin (B).

   
   CQ290134-UN-17OCT13

   A - Lock Nut

   B - Link Pin

---




2. Actuate clutch pedal 15 times. Then turn yoke (C) to remove rod play.

   
   CQ290135-UN-17OCT13

   C - Yoke

   D - Sheet

---




3. Align holes of yoke (C) and plate (D).

4. For cab tractors: Turn yoke (E) counterclockwise for one complete turn.

   
   CQ290136-UN-17OCT13

   E - Yoke

   This turn makes sure there is correct clutch pedal play.

---




5. For OOS tractors: Turn yoke (E) counterclockwise for two entire turns.

   These turns make sure there is correct clutch pedal play.

6. Install pin (F) and tighten the lock nut (G).

   
   CQ290137-UN-17OCT13

   F - Stud

   G - Lock Nut

---