Break-In Check—After First 100 Hours of Operation

IMPORTANT: If tractor has too much operating time at idle,constant speeds, and/or light load usage, or make-up oil is required during the first 100-hour period, a longer break-in period may be needed without changing Break-In Plus oil until 500 hours. (See Fuels, Lubricants, and Coolants section.)

• Change engine oil and filter. (See procedure in Engine Maintenance section.)
• Replace transmission/hydraulic oil filter. (See procedure in Transmission Maintenance section.)
• Change MFWD axle housing oil and MFWD axle wheel hub oil. (See procedures in MFWD and Front Axle Maintenance section.)