| Symptom | Problem | Solution |
|
Transmission oil overheats
| Low oil supply. |
Fill system with correct
oil.
|
| |
Clogged transmission-hydraulic oil filter.
|
Replace filter.
|
| |
Internal hydraulic leak.
|
See your John Deere
dealer.
|
| |
Hitch feedback linkage improperly adjusted.
|
Reset linkage. See your
John Deere dealer.
|
| |
Implement mounted hydraulic motor not plumbed correctly
or matched to circuit.
|
See your John Deere
dealer.
|
| |
SCV lever held in extend or retract position.
|
Return SCV lever to
neutral position.
|
| |
Transmission oil over full.
|
Drain to full mark.
|
| |
Oil cooler dirty.
|
Clean oil cooler.
|
| |
Viscous fan drive not engaged.
|
See your John Deere
dealer.
|