Adding Rear Ballast For Front Loader
CAUTION: To help prevent personal injury
or death from tractor/loader rollover, add recommended amount of ballast
to tractor. The amount of ballast listed is the minimum required for
normal loader operation. For some operations, additional ballast may
be required to maximize stability. Select one of the following ballasting
options.
|
BALLAST RECOMMENDATIONS 6105E, 6120E and
6135E TRACTORS WITH H310 Loader
|
|
H310 MSL
|
|
MFWD TRACTORS
|
Ballast
|
Heavy Duty Front Tire Load Index
|
Regular Duty Front Tire Load Index
|
|
OPTION 1
|
3-Point Hitch
|
1250 kg (2755.8 lb)
|
123 kg (271.2 lb)
|
113 kg (249.1 lb)
|
|
Rear Axle
|
500 kg (1102.3 lb)
|
|
OPTION 2
|
Rear Axle
|
N/A
|
|
H310 NSL
|
|
MFWD TRACTORS
|
Ballast
|
Heavy Duty Front Tire Load Index
|
Regular Duty Front Tire Load Index
|
|
OPTION 1
|
3-Point Hitch
|
1000 kg (2204.6 lb)
|
121 kg (266.8 lb)
|
111 kg (244.7 lb)
|
|
Rear Axle
|
0 kg (0 lb)
|
|
OPTION 2
|
Rear Axle
|
N/A
|
|
BALLAST RECOMMENDATIONS 6105E, 6120E and
6135E TRACTORS WITH H260 Loader
|
|
H260 MSL
|
|
MFWD TRACTORS
|
Ballast
|
Heavy Duty Front Tire Load Index
|
Regular Duty Front Tire Load Index
|
|
OPTION 1
|
3-Point Hitch
|
1000 kg (2425.1 lb)
|
121 kg (266.7 lb)
|
113 kg (246.9 lb)
|
|
Rear Axle
|
0 kg (0 lb)
|
|
OPTION 2
|
Rear Axle
|
N/A
|
|
H260 NSL
|
|
MFWD TRACTORS
|
Ballast
|
Heavy Duty Front Tire Load Index
|
Regular Duty Front Tire Load Index
|
|
OPTION 1
|
3-Point Hitch
|
550 kg (1212.5 lb)
|
118 kg (260.1 lb)
|
111 kg (244.7 lb)
|
|
Rear Axle
|
0 kg (0 lb)
|
|
OPTION 2
|
Rear Axle
|
N/A
|
|
Ballast Notes:
-
Per ASABE EP562 a minimum rear tread setting of 1825 mm is recommended.
Above ballast based on this tread setting.
-
Due to some tractor loader combinations resulting in high front
axle loads, 3-point hitch ballast is required as noted
-
Open operator station 4 cylinder tractors require additional
350 kg rear axle ballast when hitch ballast used (additional 100 kg
for 6 cylinders).
-
Open operator station 4 cylinder tractors require additional
500 kg rear axle ballast when hitch ballast not used (additional 150
kg for 6 cylinders).
-
Rear axle ballast based on steel wheels. For cast wheels, reduce
requirement by 220 kg per wheel.
|
|
|
PG57337,00002B1-19-20150803
|
|