Connect Cylinder Hoses to Mid SCV—If Equipped

  1. NOTE: Hose connections at mid-mount valve are color-coded.

    Match hoses to couplers using color-coded dust caps/plugs.

    Tie Band/Plug/Cap Color

    Hydraulic Function

    Black

    Bucket Cylinder—Rod End

    Yellow

    Bucket Cylinder—Head End

    Blue

    Boom Cylinder—Head End

    Red

    Boom Cylinder—Rod End

    Orange

    Attachment Cylinder—Head End

    Green

    Attachment Cylinder—Rod End

  2. Remove dust caps from hose ends.

  3. Pull dust plugs from selective control valve (SCV) couplers.

  4. CAUTION: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly. Replace damaged hoses.

    Making sure hose end and couplers are clean, slide sleeve then push hose tip firmly into coupler and release sleeve. Pull on hose to make sure positive connection was made.

  5. Connect mating (color-coded) plugs and caps together.

JZ81662,0000E4B-19-20120820