Adjust Flow Control—Rear SCV and Mid SCV—If Equipped

CAUTION: Excessive operating speed may cause injury or machine damage.

Decrease flow rate if hydraulic oil overheats, remote cylinder moves too quickly, or if hydraulic motor turns too fast.

PULV000510
PULV000510-UN-11MAR08

Rear SCV

PULV000181
PULV000181-UN-06MAR08

Mid SCV

A - Flow Control Knob

Flow control adjustment only affects the number I section of deluxe rear selective control valve (SCV) and the electrohydraulic (grapple) section of the three-function mid SCV. Other valve sections are not affected by this adjustment.

NOTE: Maximum flow possible on electrohydraulic section of three-function mid SCV is 45 L/min (11.9 gal/min).

To INCREASE flow, rotate Left (COUNTERCLOCKWISE).

To DECREASE flow, rotate Right (CLOCKWISE).

NOTE: Rear SCV: If detent kicks out before end of cycle, use SCV I and adjust flow control.

JZ81662,0000E53-19-20120820