Tighten Wheel Bolts Correctly

CAUTION: NEVER operate machine with a loose rim, wheel, hub, or axle.

NOTE: Follow checking procedure when a new machine is first used, or wheels have been off.

Any time hardware is loosened, tighten to specified torque. See “Tighten Wheel Bolts—MFWD Axle” and “Tighten Wheel Bolts—Rear Axle” in this section.

1. After driving machine about 100 m (109 yd), and before placing it under load, tighten hardware to specified torque.

2. Check hardware after working 3 hours and again after 10 hours.

3. Check all hardware frequently every 50 hours thereafter.