Flow control knob or detent does not turn.
Clean dirt from the flow control knob shaft.
Remote cylinders rate-of-travel too fast or too slow.
Adjust flow control.
Detent does not hold SCV lever.
Turn selector to correct position.
Flow control or detent setting incorrect.
Adjust flow control and detent setting.
Low Engine rpm.
Increase engine rpm.
Pressure restriction with some implements.
Reduce oil flow by changing flow control setting.
Mid SCV activated.
Avoid use of mid SCV.
Hitch activated.
Avoid use of hitch.
SVC lever releases too soon.
Kick out pressure setting incorrect.
See your John Deere dealer.
SCV lever does not release.
Built in pressure leakage with some implements.
Increase oil flow by changing flow control setting.
Incorrect flow control.
Over-torqued cable to valve connection.
Adjust torque at the connector.
Rear SCV fails to function.
Check power beyond fitting in mid SCV.
BH38674,00003D2-19-20160610