Inspect Tires

SERVICE INTERVAL
	Weekly or 50 Hour

IMPORTANT: Keep wheel hardware tight for safety.

1. Check tires daily for damage or noticeably low pressure.

2. Have any cuts or breaks repaired as soon as possible.

3. At least every 50 hours of operation, check tires with an accurate gauge having 10 kPa (0.1 bar) (1 psi) graduations. If tires contain liquid ballast, use a special air-water gauge and measure with the valve stem at bottom.

4. Check wheel hardware torque before operating, twice during first 10 hours of operation and thereafter every week/50 hours of operation.

5. Remove chemicals and petroleum products from tires as soon as possible to avoid damage.