iTEC™ Basic Operation

CAUTION: Do not operate front loaders in conjunction with Intelligent Total Equipment Control (iTEC™) to avoid sudden movements and possible accidents.

Intelligent Total Equipment Control (iTEC™ Basic) allows the operator to choose from up to three different operations which engage or disengage with one switch versus three. Differential lock, MFWD, and rear PTO are switched on and off individually or together automatically by pressing quick lower and quick raise buttons on the hitch control lever.

To activate or deactivate iTEC™ Basic, depress the iTEC™ button on the keypad or select the “ON” or “OFF” icon in the iTEC™ Menu under the Set-up Page. The iTEC™ indicator and corresponding function icons (differential lock, rear PTO, MFWD) illuminate on the primary display when iTEC™ Basic is activated.

iTEC™ Basic settings are stored in the memory and remain until the operator chooses to change them through the iTEC™ menu.

	Differential Lock1	Rear PTO1	MFWD1
Quick Lower Button Depressed	Engages immediately.	Engages when implement reaches set lowered percentage and ground speed is above 0.5 km/h (0.3 mph)	Engages immediately.
Quick Raise Button Depressed	Disengages immediately.	Disengages when implement reaches or exceeds set raised height percentage.	Disengages when the rear hitch leaves working position or goes to transport position.