Change Suspended Front Axle Housing Oil

RXA0155956-UN-02DEC16

A - Drain Plug

B - Fill Plug

SERVICE INTERVAL
	Every 600 Hour

1. Park machine on level ground. Remove key.

2. Remove the drain plug (A) and fill plug (B).

3. Install drain plug and tighten to specification.

4. Approximate suspended front axle housing oil capacity is 2.2 L (2.3 Quarts). See “Fuel, Lubricants, and Coolants” section.

5. Add Hy-gard J20C until even with bottom of fill plug.

6. Install the fill plug and tighten to specification.

   Item	Measurement	Specification
   Plug to Housing	Torque	70 N·m (52 lb·ft)