Inspect Tractor for Loose Hardware

Service Interval — Every 250 hours

IMPORTANT: It is important that wheel hardware tightness be performed frequently (every 10 hours) during the first 100 hours of operation. At reach the first 100 hours of operation, inspect every 250 hours.

2WD Front Axle

Item	Measurement	Specification
Bolts	Torque	400 N·m (295 lb-ft)
Bolts (High Clearance)	Torque	415 N·m (305 lb-ft)
Disk-to-Flange Bolts	Torque	175 N·m (130 lb-ft)

MFWD Front Axle

Item	Measurement	Specification
Wheel Rim-to Disk Bolts	Torque	245 N•m (180 lb-ft)
Wheel Disk-to-Hub Nuts	Torque	300 N•m (220 lb-ft)

Rear Axle

Item	Measurement	Specification
Rear Wheel Rim-to-Disk, (18.4-30, 16.9-30, 16.9-24 and 14.9-24)	Torque	245 N·m (180 lb-ft)
Rear Wheel Rim-to-Disk, (15.5-38 and 13.6-38)	Torque	325 N·m (240 lb-ft)
Rear Wheel Disk-to-Hub, M20 Bolts	Torque	500 N·m (370 lb-ft)