Adjust Engine Speed Control Linkage (S.N. -830204)

1. Move speed control lever to fast idle position.

2. Injection pump lever (A) must have 3-6 mm (0.12-0.25 in.) preload (B).

Specification

Injection Pump Lever -Preload 3-6 mm (0.12-0.25 in.)


A-Injection Pump Lever
B-Preload

T6008AE

03T,85,J37 -19-15MAR93-1/4

3. If not, remove cotter pin (A), disconnect swivel (C) from lever (B), and loosen lock nut (D).


A-Cotter Pin
B-Lever
C-Swivel
D-Lock Nut

T6019AI

03T,85,J37 -19-15MAR93-2/4

4. Disconnect yoke (A) from injection pump lever.

5. Loosen lock nut (B).

6. Preload lever 3-6 mm (0.12-0.25 in.) (C).

7. Turn yoke until holes align with hole injection pump lever.

8. Connect yoke to injection pump lever and tighten lock nut.

9. Speed control pedal must be as far down as it will go.

T6008AF


A-Yoke
B-Lock Nut
C-Preload Lever

03T,85,J37 -19-15MAR93-3/4

10. Loosen lock nut (D) and adjust swivel (C) until it can be installed in lever (B).

11. Install swivel in lever and cotter pin (A) in swivel. Tighten lock nut against swivel.


A-Cotter Pin
B-Lever
C-Swivel
D-Lock Nut

T6019AI

03T,85,J37 -19-15MAR93-4/4