Towing (S.N. 872257- )

IMPORTANT: Engine cannot be started by towing. Damage to transmission may result. DO NOT tow machine faster than 10 km/h (6.21 mph) or longer than 1 hour.

Towing IS NOT recommended. If you MUST tow machine, use the following procedure:

CAUTION: Prevent possible injury or death from unexpected machine movement. Block wheels to prevent machine movement before disengaging park brake.

2. Block tires.

3. Move FNR and gear shift levers to neutral.

CED,OUO1032,1200 -19-07JAN99-1/2

IMPORTANT: To avoid damage to park brake assembly from heat build-up, brake must be manually disengaged.

4. Release park brake for tow by turning cap screws (A) completely in. Loosen hex nuts (B) to adjust park brake screws (A).

5. Remove blocks from tires.

6. When towing is completed, enable park brake to hold machine by turning both cap screws out to specification (C) as illustrated. Lock cap screws with hex nuts (B).

Specification

A-Cap Screws (2 used)
B-Hex Nuts (2 used)
C-Adjustment Dimension

CED,OUO1032,1200 -19-07JAN99-2/2