Replace Brake System Filter (S.N. 872257- )

1. Remove floor mat in operator's station.

CED,OUO1032,1201 -19-08JAN99-1/4

2. Remove backhoe control lever console by removing cap screws and washers (A).


A-Console Cap Screws and Washers

T119605B

CED,OUO1032,1201 -19-08JAN99-2/4

3. Remove backhoe control pedal (A) (if equipped) by removing bolt (B).

Disconnect pedal linkage by removing jam nut (C) from ball joint.

4. Remove cap screws and washers (D) from floor plate.

5. Remove floor plate.


A-Backhoe Control Pedal
B-Backhoe Control Pedal Bolt
C-Jam Nut
D-Floor Plate Cap Screws and Washers

T119606B

CED,OUO1032,1201 -19-08JAN99-3/4

6. Disconnect hose (A) from brake system filter (B).

7. Remove brake system filter from stabilizer valve (C).

8. Install new filter in stabilizer valve.

9. Connect hose to brake system filter.

10. Install floor plate with cap screws and washers.

11. Install backhoe control lever console with cap screws and washers.

12. Install pedal linkage lock nut.

13. Install pedal with bolt.

14. Install floor mat.

T119607B


A-Hose
B-Brake System Filter
C-Stabilizer Valve

CED,OUO1032,1201 -19-08JAN99-4/4