Other Information - 710D Backhoe Loader
Transmission: (S.N. -872256)
John Deere designed and built planetary power shift with torque converter, 4-speeds forward and 2-speeds reverse. The 310 mm (12.2 in.) single stage, dual phase torque converter has 1.99:1 stall torque ratio.
Transmission: (S.N. 872257- )
A single stage torque converter drives a hydraulically engaged four speeds forward and three speeds reverse countershaft type power shift transmission.
MFWD Axle-If Equipped
For machines (S.N. -872256), limited slip differential with 19.64:1 ratio.
For machines (S.N. 872257- ), limited slip differential and opposite input rotation with 14.00:1 ratio.
Final Drives:
Heavy-duty, inboard mounted planetary type. Evenly distributes axle shock loads over three gears that run in a cooling oil bath.
Brakes:
Hydraulic wet disk service brakes are mounted inboard and are pressure cooled and lubricated. They are self-adjusting, self-equalizing, require no periodic service. Individual pedals allow them to be applied together or separately. The parking brake is an independent system that is spring-applied, hydraulically released and controlled by an electric switch on the control console. All brakes conform to SAEJ1473.
Tires:
Regular
-
Front: 14.5/75-16.1, 10PR, F3
-
Rear: 21L-24, 16PR, R4
|
|
|
CED,TX03679,3601 -19-08OCT98-1/2
|
-
Front: 14.5/75-16.1, 10PR, F3
-
Rear: 21LX28, 14PR, R4
-
Front: 16.5L-16.1, 10PR, I-1
-
Rear: 21LX28, 14PR, R4
MFWD
-
Front: 15-19.5, 8PR, lug thread
-
Rear: 21L-28, 14PR, R4
Operating Weights:
[cm
710D Basic Machine
[cmWeight
10 450 kg (23 000 lb)
Add Optional Weights:
[cm
Cab
[cmWeight
227 kg (500 lb)
[cm
MFWD
[cmWeight
590 kg (1300 lb)
[cm
Extendible Dipperstick with Required Counterweights
[cmWeight
618 kg (1362 lb)
[cm
Optional Front Counterweight
[cmWeight
318 kg (700 lb)
[cm
Reversible Stabilizer Pads
[cmWeight
41 kg (90 lb)
Loader buckets:
[cm
1.24 m
3
(1.62 cu yd)
[cmWeight
435 kg (960 lb)
[cm
1.34 m
3
(1.87 cu yd)
[cmWeight
680 kg (1500 lb)
|
|
|
CED,TX03679,3601 -19-08OCT98-2/2
|
|