710D Backhoe Loader Dimensions

  Extendible Dipperstick
Backhoe Standard Retracted Extended
A-Loading height, truck loading position 4.03 m (13 ft 3 in.) 3.98 m (13 ft 1 in.) 4.65 m (15 ft 3 in.)
B-Reach from center of swing mast 6.90 m (22 ft 8 in.) 6.90 m (22 ft 8 in.) 8.31 m (27 ft 3 in.)
C-Reach from center of rear axle 8.15 m (26 ft 9 in.) 8.15 m (26 ft 9 in.) 9.56 m (31 ft 4 in.)
D-Digging depth (SAE):      
(1) 610 mm (2 ft) flat bottom 5.53 m (18 ft 2 in.) 5.51 m (18 ft 1 in.) 7.03 m (23 ft 1 in.)
(2) 2440 mm (8 ft) flat bottom 5.26 m (17 ft 3 in.) 5.24 m (17 ft 2 in.) 6.82 m (22 ft 4 in.)
E-Maximum digging depth 5.55 m (18 ft 2 in.) 5.52 m (18 ft 1 in.) 7.04 m (23 ft 1 in.)
F-Ground clearance, minimum 356 mm (14 in.) 356 mm (14 in.) 356 mm (14 in.)
G-Bucket rotation 152°/162° 152°/162° 152°/162°
H-Transport height 4.21 m (13 ft 10 in.) 4.31 m (13 ft 11 in.) 4.31 m (13 ft 11 in.)
J-Overall length, transport 8.13 m (26 ft 8 in.) 8.13 m (26 ft 8 in.) 8.13 m (26 ft 8 in.)
K-Stabilizer width-transport 2.44 m (8 ft 0 in.) 2.44 m (8 ft 0 in.) 2.44 m (8 ft 0 in.)
L-Stabilizer spread-operating 3.48 m (11 ft 5 in.) 3.48 m (11 ft 5 in.) 3.48 m (11 ft 5 in.)
M-Overall width (less loader bucket) 2235 mm (88 in.) 2235 mm (88 in.) 2235 mm (88 in.)
Digging force, bucket cylinder (power dig position) 57.5 kN (12,940 lb) force 57.5 kN (12,940 lb) force 57.5 kN (12,940 lb) force
Digging force, crowd cylinder 42.7 kN (9600 lb) force 42.7 kN (9600 lb) force 29.8 kN (6700 lb) force

 

  Loader with 1.24 m3 (1.62 yd3 ) Bucket Loader with 1.0 m3 (1.375 yd3 ) Bucket and MFWD
N-Wheelbase 2.29 m (90.5 in.) 2.29 m (90.5 in.)
O-Dig below ground-bucket level 147 mm (5.8 in.) 152 mm (6.0 in.)
P-Rollback at ground level 40° 40°
Q- Dump clearance, bucket at 40° 2.80 m (9 ft 6 in.) 2.80 m (9 ft 6 in.)
R- Maximum height to bucket hinge pin 3.57 m (11 ft 8 in.) 3.61 m (11 ft 10 in.)
S- Maximum bucket dump angle 40° 40°
T- Reach at full height, bucket at 40° 851 mm (33.5 in.) 836 mm (32.9 in.)

 

TX,115,RR2626 -19-30SEP98-1/1