710D Backhoe Loader Lifting Capacities

T7840AS

Lift Capacity, Backhoe with Standard Dipperstick Based on SAE J31. Rated lift capacities are in kg (lb). Lift capacities are hydraulically limited.

 

A-Dipper Lift at 65°

B-Swing Pivot

C-Boom Lift

  

Lifting capacity ratings are made with bucket hinge pin, loader bucket and stabilizers on firm, level ground Lift capacities are hydraulically limited. Lifting capacities are 87% of the maximum lift over any point on the swing arc and do not exceed 75% of the tipping load.

Angle between boom and ground is 65°. Machine is equipped with 610 mm (24 in.) standard bucket, standard or extendible dipperstick and standard equipment.

TX,115,RR2660 -19-15MAR93-1/3

T7840AU

Lift Capacity, Backhoe with 1.52 m (5 ft) Dipperstick, Retracted. Based on SAE J31. Rated lift capacities are in kg (lb). Lift capacities are hydraulically limited.

 

A-Dipper Lift at 65°

B-Swing Pivot

C-Boom Lift

  

NOTE: Loader bucket on ground significantly improves side stability, therefore improving lift capacity

to the side. Lift capacity over the rear is not affected.

TX,115,RR2660 -19-15MAR93-2/3

T7840AT

Lift Capacity, Backhoe with 1.52 m (5 ft) Extendible Dipperstick, Extended Based on SAE J31. Rated lift capacities are in kg (lb). Lift capacities are hydraulically limited.

 

A-Dipper Lift at 65°

B-Swing Pivot

C-Boom Lift

  

TX,115,RR2660 -19-15MAR93-3/3