Remove and Install Halogen Bulb

1. Remove screws (A) to remove lamp cover (B), lamp (C), and lamp housing (E).

2. Disconnect wiring lead and release retainer clip to remove bulb (D).

causym CAUTION: Do not touch the halogen bulb with bare hands. Oil and moisture may cause premature bulb failure. Clean bulb glass if touched, using a oil-free cloth with alcohol.

3. Install new bulb (D).

4. Install lamp into lamp housing.

5. Install lamp cover and screws.

6. Tighten screws (A) alternately. Do not overtighten as screws may strip out plastic.

T7484AC


A-Screw (2 used)
B-Lamp Cover
C-Lamp
D-Bulb
E-Lamp Housing

TX,1673,QQ1079 -19-24AUG94-1/1