Inspect Machine Daily Before Starting

A-Check loader pivot pins

B-Check engine oil level and air cleaner

C-Check precleaner

D-Check coolant level at overflow bottle

E-Clean operator's station

F-Check backhoe pivot pins

G-Check pedals and controls for freedom of movement

H-Check tires (front and rear) and wheels for loose or missing hardware

I-Clean front grille.

ELECTRICAL SYSTEM: Check for worn or frayed wires and loose or corroded connections.

HYDRAULIC SYSTEM: Check for leaks, missing or loose clamps, kinked hoses, and lines or hoses that rub against each other or other parts.

BACKHOE, LOADER, SHEET METAL, HARDWARE: Check for loose, bent, broken or missing parts.

LUBRICATION: Check lubrication points shown on Periodic Maintenance Chart.

PROTECTIVE DEVICES: Check ROPS, guards, shields, covers, seat belt, reverse warning alarm.

FIRE PREVENTION: Clean machine of debris.

PARK BRAKE: Check for correct operation.

SAFETY: Walk around machine to clear all persons from machine area.

TX,20,RR2549 -19-15MAR93-1/1