Stopping the Engine

Before leaving the operator's seat, do the following:

1. Park machine on a level surface.

2. Lower all equipment to ground.

TX,25,BG556 -19-20JAN97-1/4

IMPORTANT: Turbocharger may be damaged if engine is not properly shut down.

3. Move FNR range lever (A) to neutral "N".

T7840AI

TX,25,BG556 -19-20JAN97-2/4

causym CAUTION: Prevent possible injury from unexpected machine movement. NEVER rely on FNR range lever alone to keep machine from moving. Machine can unexpectedly roll or move under power, resulting in death or serious injury. Always set park brake to hold machine.

4. Set the park brake switch (B) to ON.

5. Operate at 1/2 speed without load for two minutes.

T7860AG

(S.N. -872256)

T119013B

(S.N. 872257- )

TX,25,BG556 -19-20JAN97-3/4

6. Move speed control lever (C) to slow idle position.

7. Turn key switch to OFF position to stop engine.

NOTE: It is normal for STOP-engine indicator light and park brake indicator light to stay on until engine stops after key switch is turned to OFF.

8. Move hydraulic control levers to release hydraulic pressure.

T106611

(S.N. -872256)

T119012C

(S.N. 872257- )

TX,25,BG556 -19-20JAN97-4/4