Backhoe Boom, Bucket, Dipperstick, and Swing Control Levers-John Deere Pattern

CAUTION: Prevent possible personal injury from unexpected machine movement. Operate backhoe only when you are in the operator's seat facing the backhoe.

IMPORTANT: When you swing the boom, DO NOT hit stabilizer cylinder with bucket.

NOTE: When seat is turned around to backhoe operation position, sensor will sound an audible alarm and light the STOP indicator if FNR range lever is moved to forward or reverse position with park brake off.

For faster cycle times:

• Move boom, dipperstick, and bucket at the same time.
• Move lever as far as it will move for a function.

A-Lower Boom
B-Raise Boom
C-Boom Left
D-Boom Right
E-Extend Dipperstick
F-Retract Dipperstick
G-Load Bucket
H-Dump Bucket

TX,35,BG561 -19-20JAN97-1/1