Loader Control Lever

causym CAUTION: Prevent possible injury from unexpected machine movement. Operate the loader only when you are in the operator's seat facing forward.

The loader control will return to neutral if you release the lever during normal loader operation.

Push control lever all the way forward for float position. Lever will stay in this position until pulled back to neutral.

If equipped with return-to-dig, move control lever to full rollback position. The lever will stay in this position until bucket is level, then it will automatically return to neutral.

For faster cycle times:

  • Run engine at fast idle.
  • Move boom and bucket at same time.
  • Move lever as far as it will move for a function.


A-Lower Boom
B-Raise Boom
C-Rollback Bucket
D-Dump Bucket

T107214

Early Models Shown

T107216

TX,35,BG711 -19-14FEB97-1/1