Clean Dusty Primary Element
1.
Tap element with the palm of your hand, NOT ON A HARD SURFACE.
CAUTION:
Prevent possible injury from flying chips. Reduce compressed air to less than 210 kPa (2.1 bar) (30 psi) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection.
2.
If this does not remove dust, use compressed air under 210 kPa (2.1 bar) (30 psi).
3.
Direct air up and down the pleats from inside to outside. Be careful not to make a break in the element.
|