Check Hydraulic Reservoir Oil Level

NOTE: Check hydraulic oil level before starting engine, with machine parked on a level surface, backhoe and stabilizers in transport position, and loader bucket lowered to ground.

1. Park machine on level ground.

2. Position backhoe and stabilizers in transport position. Lower loader bucket to the ground.

3. With engine OFF, remove dipperstick (A).

4. The oil level must be between the upper and lower marks on the dipperstick.

5. If necessary, add oil. (See Fuels and Lubricants chapter.)

6. Install dipperstick and tighten.

T106723

(S.N. -872256)

T119065B

(S.N. 872257- )

TX,75,BG577 -19-21JAN97-1/1