Check Transmission Oil
1.
Park machine on a level surface and lower loader bucket to ground.
CAUTION:
Prevent possible injury from unexpected machine movement. Never rely on FNR range lever alone to keep machine from moving. Machine can unexpectedly roll or move under power, resulting in death or serious injury. Always engage park brake to hold machine.
2.
Engage park brake.
3.
Move FNR range lever to neutral.
4.
Start engine and run at slow idle for three minutes to warm oil.
5.
With engine running at slow idle turn dipperstick handle (A) counterclockwise and remove.
6.
Check oil level on dipperstick. If oil is not within operating range (B) add oil. (See Fuels and Lubricants chapter.)
7.
Install dipperstick and turn clockwise to tighten. Close side service door.
|