Replace Hydraulic Oil Filter

1. Turn filter (A) counterclockwise to remove.

2. Apply thin film of oil to gasket of new filter.

3. Install new filter. Turn it clockwise by hand until gasket touches mounting surface.

4. Tighten filter 3/4 to one full turn more.

5. Check hydraulic oil level.

6. Start engine. Check for leaks around filter. Tighten filter only enough to stop leaks.

7. Stop the engine. Check hydraulic oil level again.

T7831AZ

(S.N. -872256)

T119455B

(S.N. 872257- )

TX,80,RR2644 -19-15MAR93-1/1