Change Rear Axle Oil

1. Remove drain plug (A).

2. Drain oil. Dispose of waste properly.

3. Install drain plug.

4. Fill differential with oil. (See Fuels and Lubricants chapter.)

Specification

Rear Axle Differential (S.N. -872256) -Capacity 18 L (19 qt) approximate
Rear Axle (S.N. 872257- ) -Capacity 16 L (17 qt) approximate

T7826BZ

(S.N. -872256)

T119408B

(S.N. 872257- )

TX,85,BG736 -19-15FEB97-1/2

NOTE: It will take approximately five minutes for oil to settle into outer housing when oil is warm.

5. Wait five to ten minutes for oil to settle, remove check plug (A). If oil is cold, settle time may increase. Check oil level. Oil level should be to bottom of check plug hole.

6. Add oil if necessary.

7. Check oil level again.

T7896AE

(S.N. -872256)

T119407B

(S.N. 872257- )

TX,85,BG736 -19-15FEB97-2/2