Change Hydraulic Reservoir Oil (S.N. 872257- )

1. Park machine on level surface.

2. Move backhoe and stabilizers to transport position and lower loader bucket to ground. Stop engine.

3. Remove plug on end of hose (A) and drain oil. Dispose of waste properly.

4. Replace hydraulic filter. See Replace Hydraulic Filter in Maintenance-500 Hours.

5. Fill hydraulic reservoir. See Fuels and Lubricants chapter.

Specification

Hydraulic Reservoir -Capacity 40 L (10.5 gal) approximate

6. Check hydraulic reservoir oil level on dipperstick.

7. Add oil if necessary.

8. Check oil level again.

T107489

TX,86,BG773 -19-20FEB97-1/1