Backhoe Controls-John Deere Two-Lever Style

CAUTION: Several control patterns are available for this backhoe. Always verify control response before operating.

Prevent possible personal injury from unexpected machine movement. DO NOT operate backhoe unless you are in the operator's seat in backhoe operation position with stabilizers DOWN.

IMPORTANT: To avoid machine damage, do not swing boom into stabilizers.

NOTE: When seat is turned to backhoe operation position, seat position sensor will sound an audible alarm and light the STOP indicator if FNR lever is moved to FORWARD or REVERSE position.

Conversion kits for changing controls are available from your authorized dealer. Labels corresponding to other controls MUST be installed.

Use boom and swing lever (A), dipperstick and bucket lever (B), and extendible dipperstick control pedal (C), if equipped, to operate backhoe. (See Operating Backhoe-John Deere Two-Lever Controls in Operating the Machine chapter for operational information.)

A-Boom and Swing Lever
B-Dipperstick and Bucket Lever
C-Extendible Dipperstick Control Pedal-If Equipped

CED,OUO1079,369 -19-13JUN00-1/1