410G Backhoe Loader

NOTE: Specifications and design subject to change without notice. Wherever applicable,

specifications are in accordance with Standards.

Item Measurement Specification
Engine-John Deere 4045T

Rated Power @ 2200 rpm

Power SAE gross 73 kW (98 hp)

Rated Power @ 2200 rpm

Power SAE net 67 kW (90 hp)

Cylinders

Quantity 4

Displacement

Volume 4.52 L (276 in. 3 )

Engine Torque Rise

Torque 34%

Maximum Engine Net Torque

Torque 389 N·m (287 lb-ft)

Electrical System

Voltage 12-volt

Alternator

Amperage 65 amps

Alternator with Cab

Amperage 95 amps
Item Measurement Specification
410G Forward Travel Speeds 1 with Powershift Transmission

Gear 1

Speed 5.8 km/hr (3.6 mph)

Gear 2

Speed 9.5 km/hr (5.9 mph)

Gear 3

Speed 23.2 km/hr (14.4 mph)

Gear 4

Speed 39.3 km/hr (24.4 mph)
410G Reverse Travel Speeds 1 with Powershift Transmission

Gear 1

Speed 6.4 km/hr (4.0 mph)

1With standard 19.5L-24 rear tires.

OUO1079,000026F -19-12SEP00-1/3

Item Measurement Specification

Gear 2

Speed 10.6 km/hr (6.6 mph)

Gear 3

Speed 25.9 km/hr (16.1 mph)

Gear 4

Speed 25.9 km/hr (16.1 mph)

NOTE: With powershift transmission, third and fourth gear speeds are the same in reverse.

Item Measurement Specification
Steering: Hydrostatic Power

Non-Powered Axle Curb Turning Radius-Brakes Applied

Radius 3.56 m (11 ft 8 in.)

Non-Powered Axle Curb Turning Radius-Without Brakes

Radius 4.04 m (13 ft 3 in.)

Non-Powered Axle Bucket Clearance Circle-Brakes Applied

Radius 9.65 m (31 ft 8 in.)

Non-Powered Axle Bucket Clearance Circle-Without Brakes

Radius 10.59 m (34 ft 10 in.)

Non-Powered Axle Steering Wheel Turns-Stop-to-Stop

Quantity 2.3-3.0 turns

Powered Axle (MFWD) Curb Turning Radius-Brakes Applied

Radius 3.56 m (11 ft 8 in.)

Powered Axle (MFWD) Curb Turning Radius-Without Brakes

Radius 4.04 m (13 ft 3 in.)

Powered Axle Bucket Clearance Circle-Brakes Applied

Radius 9.65 m (31 ft 8 in.)

Powered Axle Bucket Clearance Circle-Without Brakes

Radius 10.59 m (34 ft 10 in.)

Powered Axle Steering Wheel Turns-Stop-to-Stop

Quantity 2.5 turns

OUO1079,000026F -19-12SEP00-2/3

Item Measurement Specification
Hydraulic System: Closed Center

Main Pressure Relief Setting

Pressure 25 000 kPa (250 bar) (3625 psi)

Flow @ 2200 rpm, Backhoe

Flow Rate 159 L/min. (42 gpm)

Flow @ 2200 rpm, Loader

Flow Rate 159 L/min. (42 gpm)

OUO1079,000026F -19-12SEP00-3/3