Remove and Install Halogen Bulb

1. Remove screws (A), cover (B), lamp (C), and lamp housing (E).

2. Disconnect wiring lead and release retainer clip to remove bulb (D).

causym CAUTION: Do not touch the halogen bulb with bare hands. Oil and moisture may cause premature bulb failure. Clean bulb glass if touched, using an oil-free cloth with alcohol.

3. Install new bulb, lamp and assemble housing.

T7484AC


A-Screw (2 used)
B-Lamp Cover
C-Lamp
D-Bulb
E-Lamp Housing

TX,90,BD2182 -19-07OCT96-1/1