Checking Park Brake

causym CAUTION: Prevent possible injury from unexpected machine movement. Machine will move if park brake is not operating properly. (See your authorized dealer for service.)

1. Fasten seat belt.

2. Start engine and move transmission control and park brake lever (A) to 1ST FORWARD.

3. Drive machine at slow idle on level ground.

4. Move transmission control and park brake lever to PARK position "P". Lever sleeve (B) must drop into position detent. Machine must stop abruptly and then MUST NOT move. (See your authorized dealer if machine does not stop and continues to move.)

T129688B


A-Transmission Control and Park Brake Lever
B-Lever Sleeve

CED,OUO1079,106 -19-04APR00-1/1