748G-III Grapple Skidder Dimensions
|
|
NOTE: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with ICED and SAE standards. Except where otherwise noted, these specifications are based on a unit with roll-over protective structure, full fuel tank, |
80 kg (175 lb) operator, and standard equipment. NOTE: Side view dimensions are for machine equipped with 30.5-32 12 PR LS2 tires and standard grapple head. |
| Item | Measurement | Specification |
|---|---|---|
|
A-Maximum Boom Height (Single Function) |
Height | 3296 mm (10 ft 9.8 in.) |
|
A-Maximum Boom Height (Dual Function) |
Height | 3781 mm (12 ft 4.9 in.) |
|
B-Overall Length (Single Function) |
Length | 7821 mm (25 ft 7.9 in.) |
|
B-Overall Length (Dual Function) |
Length | 7763 mm (25 ft 5.6 in.) |
|
C-Overall Height |
Height | 3130 mm (10 ft 3.1 in.) |
|
C-Overall Height with Factory-Installed Water Tank |
Height | 3290 mm (10 ft 9.4 in.) |
|
D-Maximum Blade Lift Above Ground |
Height | 1500 mm (4 ft 11 in.) |
CED,OUO1079,203 -19-14APR00-1/3 |
| Item | Measurement | Specification |
|---|---|---|
|
E-Maximum Blade Dig Below Ground |
Depth | 360 mm (1 ft 2 in.) |
|
F-Front Axle to Front of Machine |
Distance | 1777 mm (5 ft 10 in.) |
|
G-Front Axle To Blade Cutting Edge Arc |
Distance | 2474 mm (8 ft 1.5 in.) |
|
H-Front Axle to Articulation Joint |
Distance | 1727 mm (5 ft 8 in.) |
|
I-Wheelbase |
Distance | 3680 mm (12 ft 9 in.) |
|
J-Reach of Grapple at Ground Level (Single Function) |
Distance | 2222 mm (7 ft 3.5 in.) |
|
J-Reach of Grapple at Ground Level (Dual Function) |
Distance | 1547 mm (5 ft 1 in.) |
|
K-Height of Grapple from Ground Level (Single Function) |
Height | 863 mm (2 ft 10 in.) |
|
K-Height of Grapple from Ground Level (Dual Function) |
Height | 1331 mm (4 ft 4.4 in.) |
CED,OUO1079,203 -19-14APR00-2/3 |
|
