OMT183331 E0: 540G-III, 548G-III, 640G-III, 648G-III and 748G-III (S.N. 576253— ) Skidders , Block File: CED_OUO1079_211_19

1. Park machine on level surface.

2. Lower equipment to ground.

3. Move transmission control and park brake lever to PARK position "P".

4. Turn key switch to OFF.

causym CAUTION: Prevent possible injury from unexpected machine movement. Place blocks at front and rear of tires to prevent machine from rolling.

5. Block the tires to prevent unexpected machine movement during oil checking procedure.

CED,OUO1079,211 -19-17APR00-1/2

6. Remove one axle check plug (B).

NOTE: If oil flows from check plug hole, rear axle is full. If oil does not flow from the check plug hole, axle oil level is low.

7. Start the engine and engage the differential lock to fill rear axle.

NOTE: Oil will flow quickly. Two people may be needed to prevent unexpected oil loss.

8. Disengage the differential lock when oil flows from the check plug hole. Stop the engine.

9. Install check plug.

Rear Frame Access Panel Shown Removed

B-Check Plug (2 used)

CED,OUO1079,211 -19-17APR00-2/2