Parking the Machine

1. Move transmission control and park brake lever (A) to PARK position "P". Lever sleeve (B) must drop into slot of console.

2. Lower blade and grapple, if equipped, to the ground.

IMPORTANT: Turbocharger may be damaged if engine is not properly shut down.

3. Run engine at 1/2 speed without load for two minutes to allow turbocharger to cool down. Release accelerator pedal to slow idle.

4. Turn key switch to OFF.

5. Turn battery disconnect switch to OFF.

T129688B


A-Transmission Control and Park Brake Lever
B-Lever Sleeve

CED,OUO1079,65 -19-29MAR00-1/1