Fill and Charge Pressurized Water System-If Equipped

causym CAUTION: Release pressure by discharging fluid at hose and before removing fill plug. Injury may result from plug or cap under force.

1. Move shut-off valve lever (A) to turn water on.

2. Squeeze nozzle lever (D) to spray water.

3. Slowly remove plug (E).

IMPORTANT: Avoid machine damage. Add 25 kg (55 lb) calcium chloride to water tank before air temperature drops below 0°C (32°F).

4. Fill tank with water.

Specification

Water Tank -Capacity 60.6 L (16 gal) Approximate

causym CAUTION: Plug has a vent cross hole for release of air pressure. Do not use a substitute plug.

5. Install plug.

6. To pressurize system, connect air hose to fitting (B) and add air. Watch gauge (C) for correct air pressure.

Specification

Water Tank -Pressure 410 kPa (3.8 bar) (55 psi)

T129545C
T129560B


A-Shut-Off Valve Lever
B-Fitting
C-Gauge
D-Nozzle Lever
E-Plug

CED,OUO1079,73 -19-29MAR00-1/1