Loading Machine on a Trailer
1.
Load and unload machine on a level surface.
2.
Keep trailer bed clean.
3.
Put chock blocks against truck and trailer wheels.
4.
Always use a ramp or loading dock. Be sure ramps are of adequate strength, have a low angle, and proper height.
5.
Drive the machine up ramp in forward or in reverse. Drive it off ramp in forward or in reverse.
6.
Drive onto the ramps squarely.
7.
Park machine on trailer, centered from side to side.
8.
Lower blade and grapple, if equipped, to floor. Use blocks under blade to protect floor.
9.
Move transmission control and park brake lever to PARK position "P".
10.
Stop the engine. Remove the key.
11.
Turn steering wheel back and forth to release steering pressure.
12.
Connect frame locking bar.
13.
Put chock blocks against all machine wheels.
14.
Lock all covers.
15.
Fasten each corner of machine to the trailer with a chain or cable.
|