324H Specifications

T125007
T113710

AG,OUO1032,2786 -19-05NOV99-1/3

NOTE: Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, specifications are based on a machine equipped with all standard equipment, ROPS cab, limited slip differential lock front axle and standard rear axle, 2 spool valve with two

lever control, heater and defroster, 79 kg (175 lb) operator and full fuel tank.

324H Loader Specifications

NOTE: All machine measurements are with 15.5-25 12 PR tires and with 1.3 m 3 (1.75 cu yd) bucket.

A-Bucket hinge height 3343 mm (11 ft 0 in.)
B-Dump height 2746 mm (9 ft 0 in.)
C-Dump reach 825 mm (2 ft 8 in.)
D-Overall height 3025 mm (9 ft 11 in.)
E-Wheelbase 2500 mm (8 ft 2 in.)
F-Ground clearance 355 mm (14 in.)
G-Overall length 6040 mm (19 ft 10 in.)
H-Digging depth 75 mm (2.95 in.)
I-Bucket curl 62°
J-Width of machine 2110 mm (6 ft 11 in.)
K-Turning radius with bucket in carry position 3.79 m (12 ft 5 in.)
L-Bucket width 2400 mm (94 in.)
Bucket capacity 1.3 m3 (1.75 cu yd)
Standard operating weight 7040 kg (15,520 lb)

 

324H Engine Specifications

Engine:  
John Deere PowerTech 4045DF, Naturally Aspirated 80 SAE net hp (60 kW) @ 2400 rpm
  76 SAE gross hp (57 kW) @ 2400 rpm
Piston displacement 4.5 L (276 cu in.)
Air cleaner w/dual safety element and restriction indicator Dual stage dry type with restriction indicator
Electrical system 12 volt 65-amp alternator
Cold cranking capacity 850 amps (Dual battery is optional)
Compression ratio 17.6:1
Bore and stroke 127 mm x 106 mm (5.0 x 4.2 in.)
No. of cylinders 4
Maximum net torque at 1200 rpm 302 N·m (223 lb-ft)

 

AG,OUO1032,2786 -19-05NOV99-2/3

324H Power Train Specifications

NOTE: All travel speeds are with 15.5-25 12PR tires.

Power Train: Hydrostatic  
Travel Speeds:
Forward Speeds km/h mph
1 0-8.5 0-5.3
2 0-28 0-17.4
Reverse Speeds km/h mph
1 0-8.5 0-5.3
2 0-28 0-17.4

 

  • SERVICE BRAKES:
    • Hydraulically-actuated, isolated system
    • Foot-operated
    • External inspection
  • PARK BRAKE:
    • Spring-applied, hydraulically released
    • Warning light in monitor-Dual level
  • Indicator lights and alarm sounds with power train in gear
  • STEERING:
    • Fully hydraulic
    • 56-degree articulation angle (28 degrees each direction), plus 26 degrees rear wheel steering tied mechically to articulation

    • Tires 324H
    15.5-25 12PR X

     

    AG,OUO1032,2786 -19-05NOV99-3/3