Inspect Machine Daily Before Starting

Do periodic service checks in the Maintenance-Every 10 Hours or Daily chapter.

A-Check wheels (front and rear) for loose or missing hardware.

B-Clean operator's station.

C-Check fuel level on monitor.

D-Clean radiator.

E-Check air inlet.

F-Check tires (front and rear) for damage or wear. Check pressure.

ELECTRICAL SYSTEM: Check for worn or frayed wires and loose or corroded connections.

BOOM, BUCKET, SHEET METAL: Check for bent, broken, loose, or missing parts.

HARDWARE: Check for loose or missing parts.

PARK BRAKE: Check for correct operation.

HYDRAULIC SYSTEM: Check for leaks, missing or loose clamps, kinked hoses, and lines or hoses that rub against each other or other parts.

LUBRICATION: Check lubrication points shown on Periodic Maintenance Chart.

PROTECTIVE DEVICES: Check guards, shields, ROPS, covers, seat belt, horn and warning alarm.

SAFETY: Walk around machine to clear all persons from machine area.

CED,OUO1002,401 -19-19FEB98-1/1