Truck Loading

The most efficient technique for truck loading is the "V" method.

2. Run engine near fast idle to penetrate material.

3. Increase engine speed to fast idle and crowd into the pile.

4. As engine rpm starts to decrease, pull loader control lever back and to the left.

5. Feather hydraulics to obtain a smooth combination of bucket rollback and boom lift.

6. After filling the bucket, reverse loader and articulate 35-40 degrees. If truck is positioned close to the stockpile, raise boom to level position while reversing.

7. Travel forward to the truck while raising the boom to clear truck sideboards. Dump load.

8. Reverse direction and lower bucket to several inches above ground level.

CED,OUO1002,500 -19-25JUN91-1/1