Parking the Machine

2. Lower front-mounted equipment to ground.

3. Push park brake switch (2) to ON to engage park brake. Park brake indicator (1) will light when park brake is engaged.

IMPORTANT: Turbocharger may be damaged if engine is not properly shut down.

4. Run engine at 1/2 speed without load for 2 minutes before stopping to avoid damage to turbocharger.

5. Move engine speed control knob to slow idle position.

6. Turn key switch OFF. Remove key from switch.

1-Park Brake Indicator
2-Park Brake Switch

CED,OUOEBTW,198 -19-18FEB00-1/1